update

loop/SARA_send_data_v2.py

@@ -97,7 +97,6 @@ import os
 import traceback
 import sys
 import sqlite3
-import RPi.GPIO as GPIO
 from threading import Thread
 from datetime import datetime
 
@@ -130,31 +129,7 @@ uSpot_profile_id = 1
 conn = sqlite3.connect("/var/www/moduleair_pro_4g/sqlite/sensors.db")
 cursor = conn.cursor()
 
-def blink_led(pin, blink_count, delay=1):
-    """
-    Blink an LED on a specified GPIO pin.
 
-    Args:
-        pin (int): GPIO pin number (BCM mode) to which the LED is connected.
-        blink_count (int): Number of times the LED should blink.
-        delay (float): Time in seconds for the LED to stay ON or OFF (default is 1 second).
-    """
-    # GPIO setup
-    GPIO.setwarnings(False)
-    GPIO.setmode(GPIO.BCM)  # Use BCM numbering
-    GPIO.setup(pin, GPIO.OUT)  # Set the specified pin as an output
-
-    try:
-        for _ in range(blink_count):
-            GPIO.output(pin, GPIO.HIGH)  # Turn the LED on
-            #print(f"LED on GPIO {pin} is ON")
-            time.sleep(delay)  # Wait for the specified delay
-            GPIO.output(pin, GPIO.LOW)  # Turn the LED off
-            #print(f"LED on GPIO {pin} is OFF")
-            time.sleep(delay)  # Wait for the specified delay
-    finally:
-        GPIO.cleanup(pin)  # Clean up the specific pin to reset its state
-        print(f"GPIO {pin} cleaned up")
 
 #get config data from SQLite table
 def load_config_sqlite():
@@ -758,9 +733,6 @@ try:
                 print("Operation not allowed. This may require a different configuration.")
                 # Actions spécifiques pour ce type d'erreur
 
-            # Clignotement LED rouge en cas d'erreur
-            led_thread = Thread(target=blink_led, args=(24, 5, 0.5))
-            led_thread.start()
 
         else:
         # 2.Si la réponse contient une réponse HTTP valide
@@ -775,10 +747,7 @@ try:
                 print("*****")
                 print('<span style="color: red;font-weight: bold;">ATTENTION: HTTP operation failed</span>')
                 print("*****")
-                print("Blink red LED")
-                # Run LED blinking in a separate thread
-                led_thread = Thread(target=blink_led, args=(24, 5, 0.5))
-                led_thread.start()
+ 
 
                 # Get error code
                 print("Getting error code (11->Server connection error, 73->Secure socket connect error)")
@@ -820,9 +789,7 @@ try:
             else:
                 # Si la commande HTTP a réussi
                 print('<span class="badge text-bg-success">✅✅HTTP operation successful.</span>')
-                print("Blink blue LED")
-                led_thread = Thread(target=blink_led, args=(23, 5, 0.5))
-                led_thread.start()
+
 
                 #4. Read reply from server   
                 print("Reply from server:")                                                                         
@@ -906,10 +873,7 @@ try:
     #on a peut etre une ERROR de type "+CME ERROR: No connection to phone"
     else:
         print('<span style="color: red;font-weight: bold;">No UUHTTPCR response</span>')
-        print("Blink red LED")
-        # Run LED blinking in a separate thread
-        led_thread = Thread(target=blink_led, args=(24, 5, 0.5))
-        led_thread.start()
+
         #Vérification de l'erreur
         print("Getting type of error")
         # Split the response into lines and search for "+CME ERROR:"