first commit

sound_meter/sound_meter_nonStop.c

@@ -0,0 +1,75 @@
+/*
+Code pour lire la data du I2C decibel meter
+Pour compiler le code: gcc -o sound_meter sound_meter.c
+Connexion I2C: 
+SDA to Pi Pico GPIO 2
+SCL to Pi Pico GPIO 3
+
+Device connected on addr 0x48
+
+0x0A : Decibel register (Latest sound intensity value in decibels, averaged over the last Tavg time period.)
+0x0B : Min register (Minimum value of decibel reading captured since power-up or manual reset of MIN/MAX registers.)
+0x0C : Max register (Maximum value of decibel reading captured since power-up or manual reset of MIN/MAX registers.)
+
+#Le Tavg est programmé sur 2 octets: le high byte et le low byte.
+ valeur = (Tavg_high x 256) + Tavg_low
+ 0x07          #Averaging time (high byte) in milliseconds for calculating sound intensity levels. (default 0x03)
+ 0x08          #Averaging time (low byte) in milliseconds for calculating sound intensity levels. (default 0xE8)
+
+
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <linux/i2c-dev.h>
+#include <sys/ioctl.h>
+
+int main()
+{
+	int file;
+	char data;
+ 
+	// Open I2C1 for reading the sound meter module registers
+	if ((file = open("/dev/i2c-1", O_RDWR)) < 0)
+	{
+		perror("Failed to open I2C1!");
+		exit(1);
+	}
+	
+	// 0x48 is the decibel meter I2C address
+	if (ioctl  (file, I2C_SLAVE, 0x48) < 0)
+	{
+		perror ("db Meter module is not connected/recognized at I2C addr = 0x48");
+		close (file);
+		exit (1);
+	}
+	 
+	while (1)
+	{
+		// Decibel value is stored in register 0x0A
+		data = 0x0A;
+
+		//write: send 1 byte from data (memory address pointer) to file
+		if (write (file, &data, 1) != 1)
+		{
+			perror ("Failed to write register 0x0A");
+			close (file);
+			exit (1);
+		}
+		 
+		if (read (file, &data, 1) != 1)
+		{
+			perror ("Failed to read register 0x0A");
+			close (file);
+			exit (1);
+		}
+		 	 
+		printf ("Sound level: %d dB SPL\r\n\r\n", data);
+		sleep (1);
+	}
+	
+	close (file);
+	return 0;
+}