update

html/admin.html

@@ -81,7 +81,7 @@
               <div class="form-check mb-3">
                 <input class="form-check-input" type="checkbox" value="" id="check_NPM_5channels" onchange="update_config_sqlite('npm_5channel', this.checked)">
                 <label class="form-check-label" for="check_NPM_5channels">
-                  Next PM send 5 channels
+                  Next PM send 5 channels (no script)
                 </label>
               </div>
 
@@ -107,9 +107,9 @@
               </div>
 
               <div class="form-check mb-3">
-                <input class="form-check-input" type="checkbox" value="" id="check_WindMeter" onchange="update_config_scripts_sqlite('windMeter/read.py', this.checked)">
+                <input class="form-check-input" type="checkbox" value="" id="check_WindMeter" onchange="update_config_sqlite('windMeter', this.checked)">
                 <label class="form-check-label" for="check_WindMeter">
-                  Wind Meter
+                  Wind Meter (no script -> systemd service)
                 </label>
               </div>
 
@@ -251,6 +251,10 @@ window.onload = function() {
       //nextPM send 5 channels
       const checkbox_nmp5channels = document.getElementById("check_NPM_5channels");
       checkbox_nmp5channels.checked = response.npm_5channel;
+      //windMeter (as a config not a script -> it's running with a systemd service)
+      const checkbox_wind = document.getElementById("check_WindMeter");
+      checkbox_wind.checked = response["windMeter"];
+
 
 
   },
@@ -273,13 +277,11 @@ window.onload = function() {
       const checkbox_bme = document.getElementById("check_bme280");
       const checkbox_envea = document.getElementById("check_envea");
       const checkbox_solar = document.getElementById("check_solarBattery");
-      const checkbox_wind = document.getElementById("check_WindMeter");
 
       checkbox_NPM.checked = response["NPM/get_data_modbus_v3.py"];
       checkbox_bme.checked = response["BME280/get_data_v2.py"];
       checkbox_envea.checked = response["envea/read_value_v2.py"];
       checkbox_solar.checked = response["MPPT/read.py"];
-      checkbox_wind.checked = response["windMeter/read.py"];
 
       //si sonde envea is true
       if (response["envea/read_value_v2.py"]) {

html/database.html

@@ -71,6 +71,8 @@
                 <button class="btn btn-primary" onclick="get_data_sqlite('data_BME280',getSelectedLimit(),false)">Mesures Temp/Hum</button>
                 <button class="btn btn-primary" onclick="get_data_sqlite('data_NPM_5channels',getSelectedLimit(),false)">Mesures PM (5 canaux)</button>
                 <button class="btn btn-primary" onclick="get_data_sqlite('data_envea',getSelectedLimit(),false)">Sonde Cairsens</button>
+                <button class="btn btn-primary" onclick="get_data_sqlite('data_WIND',getSelectedLimit(),false)">Sonde Vent</button>
+
                 <button class="btn btn-warning" onclick="get_data_sqlite('timestamp_table',getSelectedLimit(),false)">Timestamp Table</button>
 
               </div>
@@ -148,22 +150,31 @@
   
 
 window.onload = function() {
-    fetch('../config.json') // Replace 'deviceID.txt' with 'config.json'
-        .then(response => response.json()) // Parse response as JSON
-        .then(data => {
-          console.log("Getting config file (onload)");
-            //get device ID
-            const deviceID = data.deviceID.trim().toUpperCase();
-            //document.getElementById('pageTitle_plus_ID').innerText = 'token: ' + deviceID;
 
-             //get device Name
-             const deviceName = data.deviceName;
 
+  //NEW way to get data from SQLITE
+  $.ajax({
+  url: 'launcher.php?type=get_config_sqlite',
+  dataType:'json',
+  //dataType: 'json', // Specify that you expect a JSON response
+  method: 'GET', // Use GET or POST depending on your needs
+  success: function(response) {
+              console.log("Getting SQLite config table:");
+              console.log(response);
+
+              //get device Name (for the side bar)
+              const deviceName = response.deviceName;
               const elements = document.querySelectorAll('.sideBar_sensorName');
               elements.forEach((element) => {
                     element.innerText = deviceName;
                 });
                 
+          },
+          error: function(xhr, status, error) {
+              console.error('AJAX request failed:', status, error);
+          }
+  }); //end ajax
+
 
   //get local RTC
   $.ajax({
@@ -178,10 +189,9 @@
               error: function(xhr, status, error) {
                   console.error('AJAX request failed:', status, error);
               }
-                });
+      }); //end AJAX
+
 
-        })
-        .catch(error => console.error('Error loading config.json:', error));
 }
 
 
@@ -199,7 +209,6 @@ function get_data_sqlite(table, limit, download , startDate = "", endDate = "")
 
   console.log(url);
   
-
   $.ajax({
     url: url,
     dataType: 'text', // Specify that you expect a JSON response
@@ -260,6 +269,12 @@ function get_data_sqlite(table, limit, download , startDate = "", endDate = "")
           tableHTML += `
               <th>Timestamp</th>
           `;
+      }else if (table === "data_WIND") {
+          tableHTML += `
+              <th>Timestamp</th>
+              <th>speed (km/h)</th>
+              <th>Direction (V)</th>
+          `;
       }
 
       tableHTML += `</tr></thead><tbody>`;
@@ -310,6 +325,12 @@ function get_data_sqlite(table, limit, download , startDate = "", endDate = "")
                     tableHTML += `
                         <td>${columns[1]}</td>
                     `;
+                }else if (table === "data_WIND") {
+                    tableHTML += `
+                        <td>${columns[0]}</td>
+                        <td>${columns[1]}</td>
+                        <td>${columns[2]}</td>
+                    `;
                 }
 
                 tableHTML += "</tr>";

html/index.html

@@ -156,7 +156,7 @@ window.onload = function() {
             error: function(xhr, status, error) {
                 console.error('AJAX request failed:', status, error);
             }
-    }); 
+    }); //end ajax
 
     /* OLD way of getting config data
     fetch('../config.json') // Replace 'deviceID.txt' with 'config.json'

loop/SARA_send_data_v2.py

@@ -54,6 +54,8 @@ CSV PAYLOAD (AirCarto Servers)
     22  -> solar_voltage
     23  -> solar_power
     24  -> charger_status
+    25  -> Wind speed
+    26  -> Wind direction
 
 JSON PAYLOAD (Micro-Spot Servers)
     Same as NebuleAir wifi
@@ -235,6 +237,8 @@ Sara_baudrate = config.get('SaraR4_baudrate', 115200)
 npm_5channel = config.get('npm_5channel', False)                #5 canaux du NPM
 selected_networkID = int(config.get('SARA_R4_neworkID', 0))
 send_uSpot = config.get('send_uSpot', False)                        #envoi sur MicroSpot ()
+wind_meter= config.get('windMeter', False)
+
 reset_uSpot_url = False
 
 #config_scripts
@@ -242,7 +246,6 @@ config_scripts =  load_config_scripts_sqlite()
 bme_280_config = config_scripts.get('BME280/get_data_v2.py', False)  
 envea_cairsens= config_scripts.get('envea/read_value_v2.py', False)
 mppt_charger= config_scripts.get('MPPT/read.py', False)
-wind_meter= config_scripts.get('windMeter/read.py', False)
 
 #update device id in the payload json
 payload_json["nebuleairid"] = device_id
@@ -628,6 +631,20 @@ try:
     #Wind meter    
     if wind_meter:
         print("➡️Getting wind meter values")
+        cursor.execute("SELECT * FROM data_WIND ORDER BY rowid DESC LIMIT 1")
+        last_row = cursor.fetchone()
+        if last_row:
+            print("SQLite DB last available row:", last_row)
+            wind_speed = last_row[1]  
+            wind_direction = last_row[2]
+
+            #Add data to payload CSV
+            payload_csv[25] = wind_speed 
+            payload_csv[26] = wind_direction
+
+        else:
+            print("No data available in the database.")
+
 
     #MPPT charger    
     if mppt_charger:
@@ -750,14 +767,15 @@ try:
     #3. Send to endpoint (with device ID)
     print("Send data (POST REQUEST):")
     command= f'AT+UHTTPC={aircarto_profile_id},4,"/pro_4G/data.php?sensor_id={device_id}&lat={device_latitude_raw}&long={device_longitude_raw}&datetime={influx_timestamp}","aircarto_server_response.txt","sensordata_csv.json",4\r'                                                                                            
-    print("sending:")
+    #print("sending:")
-    print('<p class="text-danger-emphasis">')
+    #print('<p class="text-danger-emphasis">')
-    print(command)
+    #print(command)
-    print("</p>", end="")
+    #print("</p>", end="")
+
     ser_sara.write(command.encode('utf-8'))
 
     response_SARA_3 = read_complete_response(ser_sara, timeout=5, end_of_response_timeout=120, wait_for_lines=["+UUHTTPCR", "+CME ERROR", "ERROR"], debug=True)
-    print("receiving:")
+    #print("receiving:")
     print('<p class="text-danger-emphasis">')
     print(response_SARA_3)
     print("</p>", end="")

sqlite/set_config.py

@@ -65,6 +65,7 @@ config_entries = [
     ("SARA_R4_neworkID", "20810", "int"),
     ("WIFI_status", "connected", "str"),
     ("send_uSpot", "0", "bool"),
+    ("windMeter", "0", "bool"),
     ("modem_version", "XXX", "str")
 ]
 

windMeter/read.py

@@ -18,6 +18,38 @@ Attention:  The Raspberry Pi doesn't have analog inputs, so we need an analog-to
 
 sudo /usr/bin/python3 /var/www/nebuleair_pro_4g/windMeter/read.py
 
+this need to run as a service
+
+--> sudo nano /etc/systemd/system/windMeter.service
+
+⬇️
+[Unit]
+Description=Master manager for the Python wind meter scripts
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/python3 /var/www/nebuleair_pro_4g/windMeter/read.py
+Restart=always
+User=root
+WorkingDirectory=/var/www/nebuleair_pro_4g
+StandardOutput=append:/var/www/nebuleair_pro_4g/logs/wind.log
+StandardError=append:/var/www/nebuleair_pro_4g/logs/wind_errors.log
+
+[Install]
+WantedBy=multi-user.target
+⬆️
+
+Reload systemd (first time after creating the service):
+    sudo systemctl daemon-reload
+
+Enable (once), start (once and after stopping) and restart (after modification)systemd:
+    sudo systemctl enable windMeter.service
+    sudo systemctl start windMeter.service
+    sudo systemctl restart windMeter.service
+
+Check the service status:
+    sudo systemctl status windMeter.service
+
 '''
 #!/usr/bin/python3
 import time