Extraction du code self-test dans des fichiers partagés (selftest.js +
selftest-modal.html) pour éviter la duplication. Ajout du bouton Run
Self Test sur les pages index, sensors et admin. Nouveau test RTC qui
vérifie la connexion du module DS3231 et la synchronisation horloge.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Sépare le bouton SIM en deux : Get Data (ICCID) et Get Data (IMSI)
- Ajout fonction getImsiInfo() avec commande AT+CIMI
- Parse la réponse pour extraire le numéro IMSI (15 chiffres)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Le script dans topbar.html ne s'exécutait pas car innerHTML ignore les
balises <script>. Déplacé la logique dans un fichier JS séparé
(topbar-logo.js) avec MutationObserver pour détecter l'insertion du topbar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Sensor tests (NPM, BME280, Noise, Envea) now run first, followed by
communication tests (WiFi, Modem, SIM, Signal, Network) with a
visual separator between the two sections.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add a "Firmware Version" button next to "Get Data" in the NextPM card
that calls firmware_version.py and displays the result as a badge.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add dynamic sensor testing (NPM, BME280, Noise, Envea) to the self-test
based on enabled sensors in config. Results are included in the diagnostic report.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add new "Share Report" modal with readable textarea
- Add instructions to send logs to contact@aircarto.fr
- Add "Download (.txt)" button to save report as file
- Add "Select All" button for easy manual copy
- Remove complex clipboard API code that wasn't working
- Filename format: logs_nebuleair_{deviceId}_{date}.txt
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add system info collection at start of test (device ID, name, RTC time, GPS)
- Display device info in logs header
- Fix clipboard copy with fallback for non-HTTPS contexts
- Use execCommand fallback for older browsers
- Use ASCII-safe characters for better compatibility
- Add error handling with manual copy fallback
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add "Copy Report" button that generates a formatted diagnostic report:
- Device info (ID, modem version, timestamp)
- Test results summary with status icons
- Raw AT command responses for debugging
- Detailed execution logs
- Nicely formatted for sharing with manufacturer support
Enhanced logging with raw AT responses displayed in monospace format.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add informational network status check at the beginning of self-test:
- Shows connection mode (Hotspot, WiFi, or Ethernet)
- Displays SSID/connection name
- Shows IP address and hostname.local
- Add wifi_status endpoint in launcher.php using nmcli
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add two more tests to the modem self-test:
- Test 3: Signal Strength (AT+CSQ) with quality thresholds
- Test 4: Network Connection (AT+COPS?) with operator name lookup
Respects 1 second delay between each AT command.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add "Run Self Test" button that opens a modal and runs diagnostic tests:
- Automatically enables modem_config_mode before tests
- Test 1: Modem connection (ATI command)
- Test 2: SIM card detection (AT+CCID? command)
- Respects delays between AT commands
- Always disables modem_config_mode after tests (even on failure)
- Shows real-time progress and detailed logs
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add colored signal bars (1-5) based on signal power level.
Show signal quality description, RSSI in dBm, and quality index.
Color coding: red (poor) -> orange -> yellow -> green -> blue (excellent).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add operators.json with MCC/MNC codes for common operators.
Parse AT+COPS? response to show operator name, country, technology,
and connection mode in a user-friendly format.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add user-friendly alert for SIM card status with ICCID number.
Change all modem/SIM status messages to English.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace raw AT command output with Bootstrap alerts showing modem
connection status and model. Add collapsible section for raw logs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added i18n.js script to all main pages (index, database, saraR4, wifi, logs, admin) to enable language switching functionality across the entire application. Commented out Map and Terminal menu items in the sidebar as these pages are not yet ready for production use.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
