Le script get_data.py retourne maintenant toujours du JSON, meme en cas
d'erreur (port serie, absence de donnees). Cote web, les erreurs sont
affichees proprement dans la carte capteur.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Scripts MH-Z19/get_data.py (lecture standalone) et write_data.py (écriture SQLite)
- Table data_MHZ19, config MHZ19, cleanup et service systemd (120s)
- Web UI : carte test sensors, checkbox admin, boutons database + CSV download
- SARA_send_data_v2.py non modifié (sera fait dans un second temps)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Le script dans topbar.html ne s'exécutait pas car innerHTML ignore les
balises <script>. Déplacé la logique dans un fichier JS séparé
(topbar-logo.js) avec MutationObserver pour détecter l'insertion du topbar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Le logo ModuleAir n'était pas suivi par git, empêchant
l'affichage sur les capteurs configurés en ModuleAir Pro.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Each table row in the stats card now has a download button that exports
the entire table as CSV with proper column headers, generated server-side.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Show table info (entry count, oldest/newest dates, total DB size) in a
new card on the database page, with auto-refresh and i18n support.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add VERSION file (1.0.0) and changelog.json for firmware tracking
- Add device_type config param (nebuleair_pro default, backward compatible via INSERT OR IGNORE)
- Add device_type select in admin.html Protected Settings
- Add version badge and changelog modal in Updates section
- Add get_firmware_version and get_changelog PHP endpoints
- Display firmware version in update_firmware.sh after git pull
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Sensor tests (NPM, BME280, Noise, Envea) now run first, followed by
communication tests (WiFi, Modem, SIM, Signal, Network) with a
visual separator between the two sections.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add a "Firmware Version" button next to "Get Data" in the NextPM card
that calls firmware_version.py and displays the result as a badge.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add dynamic sensor testing (NPM, BME280, Noise, Envea) to the self-test
based on enabled sensors in config. Results are included in the diagnostic report.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add new "Share Report" modal with readable textarea
- Add instructions to send logs to contact@aircarto.fr
- Add "Download (.txt)" button to save report as file
- Add "Select All" button for easy manual copy
- Remove complex clipboard API code that wasn't working
- Filename format: logs_nebuleair_{deviceId}_{date}.txt
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add system info collection at start of test (device ID, name, RTC time, GPS)
- Display device info in logs header
- Fix clipboard copy with fallback for non-HTTPS contexts
- Use execCommand fallback for older browsers
- Use ASCII-safe characters for better compatibility
- Add error handling with manual copy fallback
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add "Copy Report" button that generates a formatted diagnostic report:
- Device info (ID, modem version, timestamp)
- Test results summary with status icons
- Raw AT command responses for debugging
- Detailed execution logs
- Nicely formatted for sharing with manufacturer support
Enhanced logging with raw AT responses displayed in monospace format.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add informational network status check at the beginning of self-test:
- Shows connection mode (Hotspot, WiFi, or Ethernet)
- Displays SSID/connection name
- Shows IP address and hostname.local
- Add wifi_status endpoint in launcher.php using nmcli
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add two more tests to the modem self-test:
- Test 3: Signal Strength (AT+CSQ) with quality thresholds
- Test 4: Network Connection (AT+COPS?) with operator name lookup
Respects 1 second delay between each AT command.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add "Run Self Test" button that opens a modal and runs diagnostic tests:
- Automatically enables modem_config_mode before tests
- Test 1: Modem connection (ATI command)
- Test 2: SIM card detection (AT+CCID? command)
- Respects delays between AT commands
- Always disables modem_config_mode after tests (even on failure)
- Shows real-time progress and detailed logs
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add colored signal bars (1-5) based on signal power level.
Show signal quality description, RSSI in dBm, and quality index.
Color coding: red (poor) -> orange -> yellow -> green -> blue (excellent).
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add operators.json with MCC/MNC codes for common operators.
Parse AT+COPS? response to show operator name, country, technology,
and connection mode in a user-friendly format.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add user-friendly alert for SIM card status with ICCID number.
Change all modem/SIM status messages to English.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Replace raw AT command output with Bootstrap alerts showing modem
connection status and model. Add collapsible section for raw logs.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Retry up to 3 times if no valid frame is received
- Reduced wait time per attempt to 0.8s (total max ~3s with retries)
- Small delay between retries (0.2s)
- Only logs command on first attempt to reduce noise
This should eliminate the occasional 0 values caused by timing issues.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Some readings were returning 0 because the sensor hadn't fully
responded within 1 second. Increased to 1.5s for more reliable reads.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Increase wait time to 1 second for complete sensor response
- Read all available bytes from buffer instead of fixed 32
- Search for frame header (FF 02) anywhere in response data
(handles command echo or garbage before actual frame)
- Extract frame from header position for correct byte alignment
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The CAIRSENS sensor sends response in a single block, not two parts.
The initial read was consuming all 25 bytes leaving nothing for the
actual data read.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Replace readline() with read(32) to avoid truncation at 0x0A bytes
- Add reset_input_buffer() to clear stale data before each read
- Add initial read to consume echo/acknowledgment from sensor
- Add frame header validation (0xFF 0x02) to reject invalid data
- Add delays to allow sensor response time
Fixes issue where NO2/H2S sensors showed random spikes due to
binary data containing newline characters being misinterpreted.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Implements power saving optimizations to extend battery life on solar-powered remote air quality sensors:
- WiFi Power Saving: Disable WiFi 10 minutes after boot to save ~100-200mA
- Configurable via web UI checkbox in admin panel
- WiFi automatically re-enables after reboot for 10-minute configuration window
- Systemd timer (nebuleair-wifi-powersave.timer) manages automatic disable
- New wifi/power_save.py script checks database config and disables WiFi via nmcli
- HDMI Disable: Added hdmi_blanking=2 to boot config to save ~20-30mA
- Automatically configured during installation
- Database: Added wifi_power_saving boolean config (default: disabled)
- Uses INSERT OR IGNORE for safe updates to existing installations
- UI: Added checkbox control in admin.html for WiFi power saving
- Includes helpful description of power savings and behavior
- Services: Updated setup_services.sh and update_firmware.sh to manage new timer
Total power savings: ~120-230mA when WiFi power saving enabled
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Fixed race condition issues where device name wasn't displaying properly:
Page title fixes:
- Added document.title update to sensors.html (was missing)
- wifi.html already had it but improved reliability
Sidebar device name fixes:
- Created updateSidebarDeviceName() function with retry logic
- Attempts update immediately, then at 100ms and 500ms delays
- Handles async sidebar loading timing issues
- Added console logging for debugging
- Both sensors.html and wifi.html now reliably show device name
This ensures the device ID/name always appears in:
1. Browser tab title (e.g., "NebuleAir_001")
2. Sidebar footer (bottom of navigation)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
The light green background for the most recent data row wasn't displaying because Bootstrap's table striping was overriding it.
Changed CSS from targeting the row to targeting individual cells:
- .table .most-recent-row td
- .table-striped .most-recent-row td
Both with !important to override Bootstrap's table styles. Now the first row correctly displays with light green background.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Modified the sensors page to display a unified debug view for all Envea gas sensors:
Backend changes:
- Added new 'envea_debug' endpoint in launcher.php
- Calls: /usr/bin/python3 /var/www/nebuleair_pro_4g/envea/read_value_v2.py -d
- Returns raw debug output without parsing
Frontend changes:
- Replaced individual sensor cards with single combined card
- Card displays if any gas sensor is connected
- Shows list of connected sensors (NO2, H2S, NH3, etc.)
- New getENVEA_debug_values() function fetches debug data
- Raw output displayed in scrollable <pre> block
- No JSON parsing, no table formatting - just raw debug text
- Card width set to col-sm-6 for better visibility
This makes it easier to check if all sensors are working correctly by viewing the raw output.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Layout improvements:
- Reorganized cards to fit 3 across on large screens (col-lg-4)
- View database, download data, and danger zone now on same row
- Added h-100 class to cards for equal height
- Made delete button larger and full-width for better visibility
Button spacing:
- Added mb-2 (margin-bottom) to all measurement trigger buttons
- Improved vertical spacing for better readability
Data visualization:
- Added light green background (#d4edda) to first table row
- First row now highlights the most recent data entry
- Makes it easy to see the latest sensor reading at a glance
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Fixed race condition where translations weren't being applied to the database page when French language was selected. The issue was caused by the i18n system loading asynchronously while page content was being rendered.
Changes:
- Added applyTranslationsWhenReady() function that waits for translations to load
- Re-apply translations after dynamic content (sidebar/topbar) is loaded
- Added languageChanged event listener to re-apply translations on language switch
- Ensures all text appears in the selected language (French/English)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Changed the data retrieval query to use ROWID DESC instead of timestamp DESC, ensuring that the most recently inserted data appears first regardless of timestamp field values. This fixes the issue where entries with "not connected" or invalid timestamps would appear in wrong order.
Benefits:
- Most recent database entries always shown at top
- Works correctly even when timestamp is null, "not connected", or incorrect
- Based on actual insertion order rather than timestamp field
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
