'''
  ____    _    ____      _    
 / ___|  / \  |  _ \    / \   
 \___ \ / _ \ | |_) |  / _ \  
  ___) / ___ \|  _ <  / ___ \ 
 |____/_/   \_\_| \_\/_/   \_\
                              
Script to connect SARA-R410 to APN
AT+CGDCONT=1,"IP","data.mono"

/usr/bin/python3 /var/www/nebuleair_pro_4g/SARA/sara_setAPN.py ttyAMA2 data.mono 2
'''

import serial
import time
import sys
import json

parameter = sys.argv[1:]  # Exclude the script name
port='/dev/'+parameter[0] # ex: ttyAMA2
apn_address = parameter[1]  # ex: data.mono
timeout = float(parameter[2])  # ex:2

baudrate = 115200

ser = serial.Serial(
    port=port,  #USB0 or ttyS0
    baudrate=baudrate, #115200 ou 9600
    parity=serial.PARITY_NONE, #PARITY_NONE, PARITY_EVEN or PARITY_ODD
    stopbits=serial.STOPBITS_ONE,
    bytesize=serial.EIGHTBITS,
    timeout = timeout
)

command = f'AT+CGDCONT=1,"IP","{apn_address}"\r'
#command = f'AT+CGDCONT=1,"IPV4V6","{apn_address}"\r'
#command = f'AT+CGDCONT=1,"IP","{apn_address}",0,0\r'
ser.write((command + '\r').encode('utf-8'))


try:
    # Read lines until a timeout occurs
    response_lines = []
    while True:
        line = ser.readline().decode('utf-8').strip()
        if not line:
            break  # Break the loop if an empty line is encountered
        response_lines.append(line)

    # Print the response
    for line in response_lines:
        print(line)

except serial.SerialException as e:
    print(f"Error: {e}")

finally:
    if ser.is_open:
        ser.close()
        #print("Serial closed")